Telnet

From Wikipedia, the free encyclopedia

Telnet (short for "teletype network")[1][2] is a client/server application protocol that provides access to virtual terminals of remote systems on local area networks or the Internet.[3] Telnet consists of two components: (1) the protocol itself which specifies how two parties to communicate and (2) the software application that provides the service. User data is interspersed in-band with Telnet control information in an 8-bit byte oriented data connection over the Transmission Control Protocol (TCP). Telnet was developed in 1969 beginning with RFC 15, extended in RFC 855, and standardized as Internet Engineering Task Force (IETF) Internet Standard STD 8, one of the first Internet standards.[1][2] Telnet transmits all information including usernames and passwords in plaintext so it is not recommended for security-sensitive applications such as remote management of routers.[3][4] Telnet's use for this purpose has waned significantly in favor of SSH.[5] Some extensions to Telnet which would provide encryption have been proposed.[6]

Components[edit]

Telnet consists of two components: (1) the protocol itself and (2) the service component. The telnet protocol is a client-server protocol, based on a reliable connection-oriented transport.[3] This protocol is used to establish a connection to Transmission Control Protocol (TCP) port number 23 or 2323, where a Telnet server application is listening.[7][8][9] Telnet predated TCP/IP and originally ran over Network Control Protocol (NCP).[10] The telnet service is best understood in the context of a user with a simple terminal using the local Telnet program (known as the client program) to run a logon session on a remote computer where the user's communications needs are handled by a Telnet server program.

Telnet Protocol[edit]

History[edit]

Even though Telnet was an ad hoc protocol with no official definition until March 5, 1973,[11] the name actually referred to Teletype Over Network Protocol as the RFC 206 (NIC 7176) on Telnet makes the connection clear:[12]

The TELNET protocol is based upon the notion of a virtual teletype, employing a 7-bit ASCII character set. The primary function of a User TELNET, then, is to provide the means by which its users can 'hit' all the keys on that virtual teletype.[13]

Essentially, it used an 8-bit channel to exchange 7-bit ASCII data. Any byte with the high bit set was a special Telnet character. On March 5, 1973, a Telnet protocol standard was defined at UCLA[14] with the publication of two NIC documents: Telnet Protocol Specification, NIC 15372, and Telnet Option Specifications, NIC 15373.

Extensions[edit]

Many extensions were made for Telnet because of its negotiable options protocol architecture. Some of these extensions have been adopted as Internet standards, IETF documents STD 27 through STD 32. Some extensions have been widely implemented and others are proposed standards on the IETF standards track (see below).

Telnet service[edit]

The Telnet service is the application providing services over the Telnet protocol. Most operating systems provide a service that can be installed or enabled to provide Telnet services to clients.[15]

Security vulnerabilities[edit]

Telnet is vulnerable to network-based cyberattacks, such as packet sniffing sensitive information including passwords and fingerprinting.[4][16] Telnet services can also be exploited to leak information about the server (such as hostnames, IP addresses and brand) by packet sniffing the banner. This information can then be searched to determine if a Telnet service accepts a connection without authentication. Telnet is also frequently exploited by malware due to being improperly configured.[9] In fact, Telnet is targeted by attackers more frequently than other common protocols, especially when compared to UPnP, CoAP, MQTT, AMQP and XMPP. Common devices targeted are Internet of things devices, routers and modems.

The SANS Institute recommends that the use of Telnet for remote logins should be discontinued under normal circumstances for the following reasons:[17]

  • Telnet, by default, does not encrypt any data sent over the connection (including passwords), and so it is often feasible to eavesdrop on the communications and use the password later for malicious purposes; anybody who has access to a router, switch, hub or gateway located on the network between the two hosts where Telnet is being used can intercept the packets passing by and obtain login, password and whatever else is typed with a packet analyzer.[16]
  • Most Telnet implementations lack authentication. An estimated 22,887 Telnet-enabled devices found by security researchers not only lacked authentication but also provided unrestricted access to the system.[9]
  • Most Telnet authentication mechanisms are vulnerable to intercepted in the middle attacks.[16]

Extensions to Telnet provide Transport Layer Security (TLS) security and Simple Authentication and Security Layer (SASL) authentication that address the above concerns.[6] However, most Telnet implementations do not support these extensions; and they do not address other vulnerabilities such as parsing the banner information.[16]

IBM 5250 or 3270 workstation emulation is supported via custom telnet clients, TN5250/TN3270, and IBM i systems. Clients and servers designed to pass IBM 5250 data streams over Telnet generally do support SSL encryption, as SSH does not include 5250 emulation. Under IBM i (also known as OS/400), port 992 is the default port for secured telnet.[18]

Uses[edit]

Screenshot of a black screen with the output of the help command and a # prompt.
Figure 1: BusyBox running under the Microsoft Telnet Client from a router.

Historical uses[edit]

Historically, Telnet provided access to a command-line interface on a remote host. However, because of serious security concerns when using Telnet over an open network such as the Internet, its use for this purpose has waned significantly in favor of SSH.[19] The usage of Telnet for remote management has declined rapidly, especially on the public Internet, in favor of the Secure Shell (SSH) protocol.[3][20] SSH provides much of the functionality of telnet, with the addition of strong encryption to prevent sensitive data such as passwords from being intercepted, and public key authentication, to ensure that the remote computer is actually who it claims to be.

Modern day uses[edit]

Telnet may be used in debugging network services such as SMTP, IRC, HTTP, FTP or POP3, to issue commands to a server and examine the responses.[15][21][22] For example, Telnet client applications can establish an interactive TCP session to a port other than the Telnet server port. For example, a command line telnet client could make an HTTP request to a web server on TCP port 80 as follows:[22]

$ telnet www.example.com 80
GET /path/to/file.html HTTP/1.1
Host: www.example.com
Connection: close

The older protocol is used these days only in rare cases to access decades-old legacy equipment that does not support more modern protocols.[23] For example, a large number of industrial and scientific devices only have Telnet available as a communication option. Some are built with only a standard RS-232 port and use a serial server hardware appliance to provide the translation between the TCP/Telnet data and the RS-232 serial data. In such cases, SSH is not an option unless the interface appliance can be configured for SSH (or is replaced with one supporting SSH).

Telnet is commonly used by amateur radio operators for providing public information.[21]

Although recommended against, security researchers estimated that 7,096,465 devices connected to the Internet continue to use Telnet, however, much less are often estimated because most estimates only scan for TCP port 23.[9]

Technical details[edit]

The technical details of Telnet are defined by a variety of specifications including RFC 854.[7]

USASCII control codes[edit]

Name Byte code Explanation Notes
NULL 240
Line feed 241
Carriage return 242
Bell 243
Backspace 244
Horizontal tab 245
Vertical tab 246
Form feed 247
Source: J. Postel and Reynolds (1983)[7]

Telnet commands[edit]

Telnet commands consist of at least two bytes.[7] The first byte is the IAC escape character (typically byte 255) followed by the byte code for a given command:

Name Byte code Explanation Notes
SE 240
NOP 241
Data Mark 242
Break 243
Interrupt Process 244
Abort output 245
Are you there? 246
Erase character 247
Erase Line 248
Go ahead 249
SB 250
WILL 251
WON'T 252
DO 253
DON'T 254
Source: J. Postel and Reynolds (1983)[7]

Interpret As Command[edit]

All data octets except 0xff are transmitted over Telnet as is. (0xff, or 255 in decimal, is the IAC byte (Interpret As Command) which signals that the next byte is a telnet command. The command to insert 0xff into the stream is 0xff, so 0xff must be escaped by doubling it when sending data over the telnet protocol.)[7]

Telnet options[edit]

Telnet also has a variety of options that terminals implementing Telnet should support.

Telnet Options
Code Name Spec Notes
0 Binary Transmission RFC 856 The 8-bit mode (so named binary option) is intended to transmit binary data, not ASCII characters. The standard suggests the interpretation of codes 0000–0176 as ASCII, but does not offer any meaning for high-bit-set data octets. There was an attempt to introduce a switchable character encoding support like HTTP has,[24] but nothing is known about its actual software support.
1 Echo RFC 857
2 Reconnection NIC 15391 of 1973
3 Suppress Go Ahead RFC 858
4 Approx Message Size Negotiation NIC 15393 of 1973
5 Status RFC 859
6 Timing Mark RFC 860
7 Remote Controlled Trans and Echo RFC 726
8 Output Line Width NIC 20196 of August 1978
9 Output Page Size NIC 20197 of August 1978
10 Output Carriage-Return Disposition RFC 652
11 Output Horizontal Tab Stops RFC 653
12 Output Horizontal Tab Disposition RFC 654
13 Output Formfeed Disposition RFC 655
14 Output Vertical Tabstops RFC 656
15 Output Vertical Tab Disposition RFC 657
16 Output Linefeed Disposition RFC 658
17 Extended ASCII RFC 698
18 Logout RFC 727
19 Byte Macro RFC 735
20 Data Entry Terminal
21 SUPDUP
22 SUPDUP Output RFC 749
23 Send Location RFC 779
24 Terminal Type RFC 1091
25 End of Record RFC 885
26 TACACS User Identification RFC 927
27 Output Marking RFC 933
28 Terminal Location Number RFC 946
29 Telnet 3270 Regime RFC 1041
30 X.3 PAD RFC 1053
31 Negotiate About Window Size RFC 1073
32 Terminal Speed RFC 1079
33 Remote Flow Control RFC 1372
34 Linemode RFC 1184
35 X Display Location RFC 1096
36 Environment Option RFC 1408
37 Authentication Option RFC 2941
38 Encryption Option RFC 2946
39 New Environment Option RFC 1572
40 TN3270E RFC 2355
41 XAUTH
42 CHARSET RFC 2066
43 Telnet Remote Serial Port (RSP)
44 Com Port Control Option RFC 2217
45 Telnet Suppress Local Echo
46 Telnet Start TLS
47 KERMIT RFC 2840
48 SEND-URL
49 FORWARD_X
50-137 Unassigned
138 TELOPT PRAGMA LOGON
139 TELOPT SSPI LOGON
140 TELOPT PRAGMA HEARTBEAT
141-254 Unassigned
255 Extended-Options-List RFC 861
Source: Internet Assigned Numbers Authority (n.d)[25]


Related RFCs[edit]

Internet Standards[edit]

  • RFC 854, Telnet Protocol Specification
  • RFC 855, Telnet Option Specifications
  • RFC 856, Telnet Binary Transmission
  • RFC 857, Telnet Echo Option
  • RFC 858, Telnet Suppress Go Ahead Option
  • RFC 859, Telnet Status Option
  • RFC 860, Telnet Timing Mark Option
  • RFC 861, Telnet Extended Options: List Option

Proposed Standards[edit]

  • RFC 885, Telnet End of Record Option
  • RFC 1073, Telnet Window Size Option
  • RFC 1079, Telnet Terminal Speed Option
  • RFC 1091, Telnet Terminal-Type Option
  • RFC 1096, Telnet X Display Location Option
  • RFC 1123, Requirements for Internet Hosts - Application and Support
  • RFC 1184, Telnet Linemode Option
  • RFC 1372, Telnet Remote Flow Control Option
  • RFC 1572, Telnet Environment Option
  • RFC 2941, Telnet Authentication Option
  • RFC 2942, Telnet Authentication: Kerberos Version 5
  • RFC 2943, TELNET Authentication Using DSA
  • RFC 2944, Telnet Authentication: SRP
  • RFC 2946, Telnet Data Encryption Option
  • RFC 4248, The telnet URI Scheme

Informational/experimental[edit]

  • RFC 1143, The Q Method of Implementing TELNET Option Negotiation
  • RFC 1571, Telnet Environment Option Interoperability Issues

Other RFCs[edit]

  • RFC 1041, Telnet 3270 Regime Option
  • RFC 2355, TN3270 Enhancements
  • RFC 1205, 5250 Telnet Interface
  • RFC 2217, Telnet Com Port Control Option
  • RFC 4777, IBM's iSeries Telnet Enhancements

Telnet clients[edit]

In popular culture[edit]

Star Wars: Episode IV – A New Hope from 1977 has been recreated as a text art movie served through Telnet.[26]

See also[edit]

References[edit]

  1. ^ a b Wheen, Andrew (2011). Dot-dash to Dot.Com: How Modern Telecommunications Evolved from the Telegraph to the Internet. Springer. p. 132. ISBN 9781441967596.
  2. ^ a b Meinel, Christoph; Sack, Harald (2013). Internetworking: Technological Foundations and Applications. X.media.publishing. p. 57. ISBN 978-3642353918.
  3. ^ a b c d Valenčić, D.; Mateljan, V. (2019). "Implementation of NETCONF Protocol". 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO): 421–430. doi:10.23919/MIPRO.2019.8756925. ISBN 978-953-233-098-4. S2CID 195883872.
  4. ^ a b Daş, Resul; Karabade, Abubakar; Tuna, Gurkan (2015). "Common network attack types and defense mechanisms". 2015 23nd Signal Processing and Communications Applications Conference (SIU): 2658–2661. doi:10.1109/SIU.2015.7130435. ISBN 978-1-4673-7386-9. S2CID 11256038.
  5. ^ Todorov, Dobromir (2007). Mechanics of user identification and authentication : fundamentals of identity management. Boca Raton: Auerbach Publications. ISBN 978-1-4200-5220-6. OCLC 263353270.
  6. ^ a b Mahmood, H.B. (2003). "Transport layer security protocol in Telnet". 9th Asia-Pacific Conference on Communications (IEEE Cat. No.03EX732). 3: 1033–1037 Vol.3. doi:10.1109/APCC.2003.1274255. ISBN 0-7803-8114-9. S2CID 56798078.
  7. ^ a b c d e f Postel, J.; Reynolds, J. K. (1983). "Telnet Protocol Specification". Network Working Group. doi:10.17487/RFC0854. ISSN 2070-1721.
  8. ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org. Retrieved 2023-01-12.
  9. ^ a b c d Srinivasa, Shreyas; Pedersen, Jens Myrup; Vasilomanolakis, Emmanouil (2021-11-02). "Open for hire: attack trends and misconfiguration pitfalls of IoT devices". Proceedings of the 21st ACM Internet Measurement Conference. IMC '21. New York, NY, USA: Association for Computing Machinery: 195–215. doi:10.1145/3487552.3487833. ISBN 978-1-4503-9129-0. S2CID 240357287.
  10. ^ Postel, J. (1981). "NCP/TCP transition plan". Network Working Group. doi:10.17487/RFC0801. ISSN 2070-1721.
  11. ^ RFC 318 — documentation of old ad hoc telnet protocol
  12. ^ Bruen, Garth O. (2015). WHOIS Running the Internet: Protocol, Policy, and Privacy (1st ed.). Wiley. p. 25. ISBN 9781118679555.
  13. ^ The RFC 206 (NIC 7176) Archived 2017-03-15 at the Wayback Machine, 9 August 1971; Computer Research Lab, UCSB; J. White.
  14. ^ RFC 495 — announcement of Telnet protocol
  15. ^ a b Shimonski, Robert J.; Eaton, Wally; Khan, Umer; Gordienko, Yuri (2002-01-01), Shimonski, Robert J.; Eaton, Wally; Khan, Umer; Gordienko, Yuri (eds.), "Chapter 11 - Detecting and Performing Security Breaches with Sniffer Pro", Sniffer Pro Network Optimization and Troubleshooting Handbook, Burlington: Syngress, pp. 513–565, ISBN 978-1-931836-57-9, retrieved 2023-01-12
  16. ^ a b c d Samtani, Sagar; Yu, Shuo; Zhu, Hongyi; Patton, Mark; Chen, Hsinchun (2016). "Identifying SCADA vulnerabilities using passive and active vulnerability assessment techniques". 2016 IEEE Conference on Intelligence and Security Informatics (ISI): 25–30. doi:10.1109/ISI.2016.7745438. ISBN 978-1-5090-3865-7. S2CID 11741873.
  17. ^ Kirk, Jeremy (2007-02-12). "Zero-day flaw in Solaris allows remote attacks". Network World. Retrieved 2023-01-12.
  18. ^ "IBM TCP/IP Ports Required for Access for Windows and Related Functions - United States". www-01.ibm.com. IBM Technote. Archived from the original on 2016-09-18. Retrieved 2016-09-07.{{cite web}}: CS1 maint: others (link)
  19. ^ Todorov, Dobromir (2007). Mechanics of user identification and authentication : fundamentals of identity management. Boca Raton: Auerbach Publications. ISBN 978-1-4200-5220-6. OCLC 263353270.
  20. ^ Poulsen, Kevin (2 April 2007). "Telnet, dead at 35...RIP". Wired. p. 24. Archived from the original on 21 December 2016. Retrieved 14 June 2017.
  21. ^ a b "Telnet | PDF | Networking Standards | Internet Standards". Scribd. Retrieved 2023-01-12.
  22. ^ a b "SysAdmin MD". www.sysadmin.md. Retrieved 2023-01-12.
  23. ^ Ylonen, Tatu. "History of the SSH Protocol". SSH home page. SSH Communications Security, Inc. Archived from the original on 25 July 2018. Retrieved 14 June 2017.
  24. ^ RFC 2066 — TELNET CHARSET Option
  25. ^ "Telnet Options". www.iana.org. Retrieved 2023-01-12.
  26. ^ "The Lost Worlds of Telnet". The New Stack. 10 March 2019. Retrieved 5 June 2022.

External links[edit]