An international standard is a technical standard developed by one or more international standards organizations. International standards are available for consideration and use worldwide. The most prominent such organization is the International Organization for Standardization (ISO). Other prominent international standards organizations including the International Telecommunication Union (ITU) and the International Electrotechnical Commission (IEC). Together, these three organizations have formed the World Standards Cooperation alliance.
International standards may be used either by direct application or by a process of modifying an international standard to suit local conditions. Adopting international standards results in creating national standards that are equivalent, or substantially the same as international standards in technical content, but may have (i) editorial differences as to appearance, use of symbols and measurement units, substitution of a point for a comma as the decimal marker, and (ii) differences resulting from conflicts in government regulations or industry-specific requirements caused by fundamental climatic, geographic, technologic, or infrastructure factors, or the stringency of safety requirements that a given standard authority considers appropriate.
International standards are one way to overcome technical barriers in international commerce caused by differences among technical regulations and standards developed independently and separately by each nation, national standards organization, or business. Technical barriers arise when different groups come together, each with a large user base, doing some well established thing that between them is mutually incompatible. Establishing international standards is one way of preventing or overcoming this problem. To support this, the World Trade Organization (WTO) Technical Barriers to Trade (TBT) Committee published the "Six Principles" guiding members in the development of international standards.
The implementation of standards in industry and commerce became highly important with the onset of the Industrial Revolution and the need for high-precision machine tools and interchangeable parts. Henry Maudslay developed the first industrially practical screw-cutting lathe in 1800, which allowed for the standardisation of screw thread sizes for the first time.
Maudslay's work, as well as the contributions of other engineers, accomplished a modest amount of industry standardization; some companies' in-house standards spread a bit within their industries. Joseph Whitworth's screw thread measurements were adopted as the first (unofficial) national standard by companies around the country in . It came to be known as the British Standard Whitworth, and was widely adopted in other countries.
By differences in standards between companies were making trade increasingly difficult and strained. The Engineering Standards Committee was established in London in as the world's first national standards body. After the First World War, similar national bodies were established in other countries. The Deutsches Institut für Normung was set up in Germany in , followed by its counterparts, the American National Standard Institute and the French Commission Permanente de Standardisation, both in .
There are not many books that cover standards in general, but a book written in by Nicholas Rich and Tegwen Malik gives a very comprehensive overview of the history of standards, how ISO standards are drafted along with key ISO standards such as ISO 9001 and ISO 14001. A paper has been published explaining the differences between international standards and private standards.
One of the most well established international standardization organizations is the International Telecommunication Union (ITU), a specialized agency of the United Nations which was founded on 17 May 1865 as the International Telegraph Union. The ITU was initially focused on the standardization of telegraph signals, and later evolved to include telephony, radio and satellite communications, and other information and communication technology.
By , efforts were being made to standardize electrical measurement. An important figure was R. E. B. Crompton, who became concerned by the large range of different standards and systems used by electrical engineering companies and scientists in . Many companies had entered the market in and all chose their own settings for voltage, frequency, current and even the symbols used on circuit diagrams. Adjacent buildings would have totally incompatible electrical systems simply because they had been fitted out by different companies. Crompton could see the lack of efficiency in this system and began to consider proposals for an international standard for electric engineering.
In , Crompton represented Britain at the Louisiana Purchase Exposition in St. Louis as part of a delegation by the Institute of Electrical Engineers. He presented a paper on standardisation, which was so well received that he was asked to look into the formation of a commission to oversee the process. By , his work was complete and he drew up a permanent constitution for the first international standards organization, the International Electrotechnical Commission (IEC). The body held its first meeting that year in London, with representatives from 14 countries. In honour of his contribution to electrical standardisation, Lord Kelvin was elected as the body's first President.
The International Federation of the National Standardizing Associations (ISA) was founded in with a broader remit to enhance international cooperation for all technical standards and specifications. The body was suspended in during World War II.
After the war, ISA was approached by the recently formed United Nations Standards Coordinating Committee (UNSCC) with a proposal to form a new global standards body. In , ISA and UNSCC delegates from 25 countries met in London and agreed to join forces to create the International Organization for Standardization (ISO); the organization officially began operations in .
Global Standards are standards that are designed with the entire world in mind, but unlike international standards, are not developed in international organizations (intergovernmental organizations), but rather in private entities, like NGOs.
- International Electrotechnical Commission
- International Organization for Standardization
- International Telecommunication Union
- List of international common standards
- List of technical standard organisations
- Standards organization
- Technical standard
- World Standards Cooperation
- World Standards Day (14 October annually)
- "Principles for the Development of International Standards, Guides and Recommendations". wto.org. World Trade Organization. Retrieved 20 September 2021.
- Wang Ping (April 2011), A Brief History of Standards and Standardization Organizations: A Chinese Perspective (PDF), EAST-WEST CENTER WORKING PAPERS
- Gilbert, K. R., & Galloway, D. F., 1978, "Machine Tools". In C. Singer, et al., (Eds.), A history of technology. Oxford, Clarendon Press & Lee, S. (Ed.), 1900, Dictionary of national biography, Vol LXI. Smith Elder, London
- "BSI Group Annual Report and Financial Statements 2010, page 2" (PDF). Retrieved 2012-04-03.
- Robert C McWilliam. BSI: The first hundred years. 2001. Thanet Press. London
- Page, Kogan. "International Standards for Design and Manufacturing". Kogan Page. Retrieved 2021-08-22.
- International standards and private standards. International Organization for Standardization. 2010. ISBN 978-92-67-10518-5. Retrieved 26 September 2021.
- "Discover ITU's History".
- Colonel Crompton, IEC Website Archived 2010-09-03 at the Wayback Machine
- Johnson, J & Randell, W (1948) Colonel Crompton and the Evolution of the Electrical Industry, Longman Green.
- Chris K. Dyer; Patrick T. Moseley; Zempachi Ogumi; David A. J. Rand; Bruno Scrosati Newnes (2010). Encyclopedia of Electrochemical Power Sources. p. 540. ISBN 9780444527455.
- IEC. "1906 Preliminary Meeting Report" (PDF). The minutes from our first meeting. pp. 46–48. Retrieved 21 October 2012.
- Friendship among equals: Recollections from ISO's first fifty years (PDF). International Organization for Standardization. 1997. pp. 15–18. ISBN 92-67-10260-5. Retrieved 26 December 2013.
- Media related to International standards at Wikimedia Commons