ISO 2848

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

International standard ISO 2848 (Building construction – Modular coordination – Principles and rules, International Organization for Standardization, 1984) is an ISO standard used by the construction industry. It is based on multiples of 300 mm and 600 mm

The numbers 300 and 600 were chosen because they are preferred numbers due to their large number of divisors – any multiple can be evenly divided into 2, 3, 4, 5, 6, 10, 12, 15, 20, 25, 30, etc., making them easy to use in mental arithmetic. This system is known as "modular coordination". A related standard is British Standard 6750.

Basic module[edit]

The standard unit of ISO 2848 is a basic module, a length of 100 millimetres (3.937 in) which is represented in the standards by the letter M. Adherence to the standard means that major dimensions such as grid lines on drawings, distances between wall centres or surfaces, widths of shelves and kitchen components are multiples of the basic module. As dimensions increase, preference is given to lengths which are multiples of 3 (see metric foot), 6, 12, 15, 30 and 60 basic modules. For smaller dimensions, the submodular increments 14 M (see metric inch) and 12 M are preferred.

Metric foot[edit]

A metric foot[1][2] is a nickname for the preferred number length of 3 basic modules (3 M), or 300 millimetres (11.811 in). The 300 mm metric rule is of a similar length to the traditional imperial one-foot rule. A metric foot is 4.8 millimetres (0.189 in) shorter than an imperial foot.

Although the term "metric foot" is still occasionally used in the United Kingdom, in particular in the timber trade, dimensions are most likely to be quoted exclusively in metric units today.

The sizes of the studios at BBC Television Centre in London, which opened in 1960, are specified and measured in metric feet, in contrast to film stages where imperial feet and inches prevail.

Metric inch[edit]

A metric inch[1][2] is a nickname for a preferred 14 subdivision of an ISO 2848 basic module, or 112 of a metric foot measuring 25 millimetres (0.984 in). A metric inch is 0.4 millimetres (0.016 in) shorter than an inch, since the inch is defined as 25.4 millimetres.

The term was similarly used to refer to the historical Eastern Bloc practice of spacing integrated circuit pins at 110 of a 25 mm "metric inch" length, instead of the Western practice of 110 of an imperial inch.

Further reading[edit]


  1. ^ a b Timber and Plywood Annual, Middlesex Publishing Company, 1969, p. 26
  2. ^ a b Encyclopedia of Distances, Springer, 2014, p. 597, ISBN 978-3662443422